WATER ANALYSIS; SEPARATION TECHNIQUES

While analyzing or treating water, some measurement require separating the analyte from other substances in water which may interfere with the process. Some separation techniques include;

  • Filtration- this is where water is separated from suspension by passing through a fine-pore filter with a membrane a given standard pore size. The size of the pore depends on the standards of separation required.
  • Distillation- the analyte is boiled out of water, where vapors are the cooled and re-condensed or trapped in a liquid form in a different container. By doing this, suspended or any solid substances are removed from water.
  • Extraction- some analyte is much more soluble in organic solvent than in water. In most cases solvent which does not dissolve in water is used. The sample is mixed with solvent, and almost all the analyte may be transferred to solvent, hence water with no particles.

Water analysis is a complex technique. It needs experts to undertake. For experts, contact Purity Bay to do the analysis for you.

Contact Purity Bay using contacts below:

CORPORATE COMMUNICATIONS

TOLL-FREE: 1-888-893-7374 or 888-943-7374  ,  that’s  888-89-FRESH
West U.S. : Purity Bay,llc

Corporate Office: 7362 Remcon Circle  El Paso Texas 79912.

East Coast:  Purity Bay-East,llc  2451 McMullen Booth Road, Suite 200,  Clearwater, Florida 33756

WAIVER: Purity Bay, LLC, its staff, dealers and affiliates make no general or specific health or performance claims of any kind. Regardless what occasional contributing writers post on blogs or social media sites this disclaimer applies. Certain technologies are known to do certain things but no one system does all things for all situations. Readers are advised to do their own research for all matters and not rely on this or any one site or advisor. Studies exist at www.WQA.org.

 

WAIVER: Purity Bay, LLC, its staff, dealers and affiliates make no general or specific health or performance claims of any kind. Regardless what occasional contributing writers post on blogs or social media sites this disclaimer applies. Certain technologies are known to do certain things but no one system does all things for all situations. Readers are advised to do their own research for all matters and not rely on this or any one site or advisor. Studies exist at www.WQA.org. Purity Bay makes no claims about your specific water composition, or quality or about any specific solution, savings or benefits. Proper individual testing, evaluation, equipment selection, installation, maintenance and upgrades are required. Plus water and usages change. Purity Bay does not state or imply that any local utility falls short in state or federal standards in addressing general health or water concerns. On the contrary, we claim they do heroic jobs given limited resources and increasing demand on a limited resources that is being polluted more each day. Actual industry positions and studies on savings, benefits, performance, general water conditions and industry codes are available at www. WQA.org. Avoid mistakes. Study your annual utility reports ,ask to see WQA Certifications from anyone advising you. Plus do your own research at www.WQA.org.

This entry was published in Aluminum, Arsenic, Bacteria, Basic Water Safety, Chlorine, CLEAN WATER, Pharmaceuticals, Water Additives, Water Pollution, Water Treatment. Bookmark the permalink.

Comments are closed.